Metz 28 C-2 User Manual download pdf (Page 25)

2. Preparing the flashgun for use

2.3 Battery check

This facility can only be used to test dry-cell alkaline-

manganese batteries. The battery indicator lamp lights

up when the

batteries still have sufficient power. If the

indicator lamp does not light up, the batteries contain

only a low residual capacity and should be replaced

with a new set.

2.4 Mounting the mecablitz on the camera

• Turn the knurled nut of the mecablitz right up

against the flashgun.

• Slide the mecablitz into the camera’s accessory

shoe.

• Turn the knurled nut of the mecablitz right up

against the camera, thereby clamping the flash-

gun on the camera.

2.5 Synchronisation

The mecablitz is fitted with a hot shoe contact for

simple flash synchronisation.

2.6 Switching the flashgun on and off

Switch on the mecablitz with switch I. This causes

the green operating light to become illuminated.

Press the O switch to switch off the flashgun. The

green

operating light is now turned off, but the

mecablitz remains ready for operation as long as the

orange flash-ready light is on.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

No comments

Metz 28 C-2 User Manual Page 25