Metz MF 55TK36 User Manual download pdf (Page 23)

- 21 -

Copy Facility

Source selection for VCR recording.

 Select Features Menu in the Main Menu.

 Select AV-2 OUTPUT source pressing 

 or



 button.

Camera and Camcorder

To connect to Front-AV input

(FAV):

Connect your camera or camcorder at the

front side of your TV.

 Connect your equipment to the TV via VIDEO

(yellow), AUDIO R (red) and AUDIO L (white)

inputs. You should connect the jacks to the

input in the same colour.

Search for and store the test signal

of the video recorder

 Unplug the aerial cable from the aerial

socket ANT of your video recorder.

 Switch on your TV and put the video recorder

on the test signal. (See the handbook for

your video recorder.)

 Enter the Tuning menu via the Install menu.

 Search for the test signal of your video re-

corder in the same way as you searched for

and stored the TV signals. See Tuning,

Search and Store TV channels. Store the

test signal under programme number 0.

 Replace the aerial cable in the aerial socket

ANT of your video recorder once you have

stored the test signal.

Connect the decoder to the video

recorder

Some video recorders have a special

euroconnector for decoder.

 Connect a eurocable to the euroconnector of

your decoder and to the special euroconnector

of your video recorder. See also the hand-

book of your video recorder.

 To connect your video recorder to the TV, see

TV and Video Recorder section.

If you want to connect more equipment to

your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket (HP) on

the lower front / right side of your TV, to con-

nect headphones.

Tips

Care of the Screen

Clean the screen with a slightly damp, soft

cloth.Do not use abrasive solvents as they

may damage the TV screen coating layer

Poor Picture

Have you selected the correct TV system? Is

your TV set or house aerial located too close

to the loudspeakers, non-earthed audio equip-

ment or neon lights, etc. ?

Mountains or high buildings can cause double

pictures or ghost images. Sometimes you

can improve the picture quality by changing

the direction of the aerial.

Is the picture or Teletext unrecognisable?

Check if you have entered the correct fre-

quency.

The picture quality may degrade when two

peripherals are connected to the TV at the

same time. In such a case, disconnect one

of the peripherals.

No Picture

Is the aerial connected properly? Are the

plugs connected tightly to the aerial socket?

Is the aerial cable damaged? Are suitable

plugs used to connect the aerial? If you are

in doubt, consult your dealer.

No Picture means that your TV is not receiv-

ing any transmission. Have you pressed the

correct keys on the remote control? Try once

more.

Sound

You can not hear any sound. Did you perhaps

interrupt the sound, pressing 

key? Are

external speakers connected to the TV?

1 2 ... 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments