Metz 44 AF-4i N Operations Instructions download pdf (Page 68)

8. Troubleshooting

Should the LC display indicate meaningless infor-

mation or should the flash unit not work properly

in the individual modes, then switch off the meca-

blitz for about 10 seconds by its main switch.

Check the camera settings and find out if the flash

unit’s foot is correctly mounted in the camera’s

accessory shoe.

The mecablitz must operate properly when it is

switched on again. Contact your local dealer

should this not be the case.

9. Maintenance and care

Remove any grime and dust with a soft, dry or

silicon-treated cloth. Never use detergents that

could damage plastic parts.

Forming the flash capacitor

The flash capacitor incorporated in the flash unit

undergoes a physical change when the flash unit is

not switched on for prolonged periods of time. For

this reason it is necessary to switch on the mecablitz

for approx. 10 minutes every 3 months (see 2.4!).

The batteries must supply sufficient power for flash

readiness to be indicated within 1 minute after the

mecablitz was switched on.

Advice in the event of a fault

Maintenance and care

In caso di anomalie di funzionamento

Cura e manutenzione

Ayuda en caso de problemas

Mantenimiento y cuidados

701 47 0098.A2 GB-I-E (PDF) 12.05.2003 9:48 Uhr Seite 68

http://www.mynikon.com.pl

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 79 80

No comments

Metz 44 AF-4i N Operations Instructions Page 68