Metz MECABLITZ 64 AF-1 digital Sony User Manual download pdf (Page 185)

10.1.5 Remote channel settings

There are four independent remote channels

to use so that multiple remote systems in the

same room do not interfere with one another.

Master and Slave flash units belonging to the

same remote system must be set to the same

remote channel.

• Press the  button as often as it takes

for the selection menu to appear.

• Press the sensor button on the

touch display.

• Press the sensor button on the

touch display.

• Press the sensor buttons on the

touch display and select a remote channel,

e.g .

• Press the sensor button on the touch

display for the desired channel.

The setting will take effect immediately.

Press  and check the channel setting.

D

PARAMETER

CHANNEL

CHANNEL 2

i

10.2 Remote slave flash mode

The flash unit supports the wireless remote

system in slave flash mode and is compatible

with the Sony system.

At the same time, one or more slave flash

units can be remotely controlled from one

master flash unit on the camera (e.g. meca-

blitz 5 64AF-1S digital).

A slave flash unit can be assigned to two of

three possible slave groups (RMT, RMT2). The

master flash unit can control all of these sla-

ve groups simultaneously and at the same

time take the settings for each slave group

into account.

So that multiple remote systems in the same

room do not interfere with one another, there

are four independent remote channels avai-

lable (CH 1, 2, 3 or 4).

Master and slave flash units belonging to the

same remote system must be set to the same

remote channel.

The slave flash units must be able to receive

the light from the master flash unit with the

integrated sensors for the remote mode .

Depending on the camera model, the came-

ra’s internal flash unit can also function as

master flash unit.

185

k

PARAMETER

O

q

p

ZOOM

CHANNEL

RATIO

CHANNEL

O

q

p

CHANNEL 1

CHANNEL 2

CHANNEL 3

PARAMETER

1 2 ... 180 181 182 183 184 185 186 187 188 189 190 ... 325 326

Comments to this Manuals

No comments