Metz 44 AF-1 digital Instruction Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 158
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
77
ķ
2 Dedicated flash functions
Dedicated flash functions are flash func-
tions that have been specially adapted to
a given camera system. Depending on
the type of camera, different flash func-
tions are supported.
• Flash-ready indication in camera view-
finder
• Automatic flash sync speed control
• Preflash TTL and ADI metering
• Automatic fill-in flash control
• Manual flash exposure correction
• 1st or 2nd curtain synchronisation
(REAR)
• Automatic motor zoom control
• Automatic AF measuring beam control
• Triggering control (AUTO FLASH)
• Wireless
remote flash mode
• Wake-up function for the flash unit
• Firmware updates
It is impossible to describe all camera
types and their individual dedicated
flash functions within the scope of these
instructions. Therefore, please refer to
the flash mode description in your
camera’s operating instructions to find
out which functions are supported and
which ones have to be set manually on
the camera.
3
Preparing the flash unit for use
3.1 Mounting the flash unit
Mounting the flash unit on the camera
Turn off the camera and flash before
mounting or removing.
• Turn the knurled nut towards the
flash unit housing as far as it will go.
• Slide the flash unit foot completely into
the camera accessory shoe.
• Turn the knurled nut towards the
camera housing as far as it will go,
clamping the flash unit in place.
Removing the flash unit from the camera
Turn off the camera and flash before
mounting or dismounting.
• Turn the knurled nut towards the
flash unit housing as far as it will go.
• Remove the flash unit from the
camera’s accessory shoe.
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 157 158

Comments to this Manuals

No comments