Metz 44 AF-1 digital Instruction Manual download pdf (Page 84)

84

ķ

5.4 Manual flash mode

In manual flash mode

M

, full flash output

is deployed if no partial lighting is set. By

selecting a suitable partial light output or

adjusting the camera’s aperture, it is pos-

sible to adapt to the ambient situation.

The adjustable range stretches from

P 1/1 — P1/64.

Configuration procedure

• Switch on the flash unit by pressing the

button  .

• Press "M"  to set the manual opera-

ting mode

M

.

Manual partial light output

Partial light output can be configured in

manual operating mode

M

.

Configuration procedure

• Press the "M"  button on the flash

unit until the LED illuminates the des-

ired partial light output 1/1, 1/2, 1/8

or 1/64.

The setting is effective immediately and

saved automatically.

Various camera types only support

manual flash adjustment in manual M

camera operating mode.

6 Motor zoom main reflector

The flash unit motor zoom main reflector

can illuminate lens focal lengths from

24mm (135 format).

By using the integrated wide-angle diffu-

ser  this value is extended to 12mm.

Auto zoom

The zoom position of the main reflector is auto-

matically adjusted to the lens focal length when

the flash unit is used with a camera that trans-

mits the data related to the lens focal length.

Automatic adjustment does not occur

when the main reflector is pivoted, the

wide-angle diffuser  is extended or a

Mecabounce (accessory) is attached.

Adjustment is automatic for lens focal

lengths from 24mm.

If a focal length of under 24mm is

employed, the LED button of the intended

mode flashes to warn that the shot can-

not be exposed completely. In such a

scenario, use the wide-angle diffuser .

☞

☞

Ǽ

Ǽ

M

TTL

SL

Ǽ

M

TTL

SL

1/1 1/2 1/8 1/64

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 157 158

Comments to this Manuals

No comments