Metz 76 MZ-5 User Manual download pdf (Page 84)

For system reasons the extended zoom mode is supported for a focal

length of lens from 28 mm. The flash unit must be equipped with a

suitable SCA adapter from the SCA 3002 system and the camera must

supply the data for the focal length of the lens to the flash unit.

After the activation of the extended zoom mode, E-Zoom appears in the

display next to the focal length.

Setting procedure see cap. 8.

8.5 Shooting format adjustment (zoom size)

When operating a digital camera with a suitable SCA adapter from the

SCA 3002 system the display for the reflector position can be adjusted to the

chip format (dimensions of the picture recording component).

• “Size ON” in the display indicates that the shooting format adjustment is

activated.

• “Size OFF” in the display indicates that the shooting adjustment is deacti-

vated.

After the activation of shooting format adjustment, S-Zoom appears in the

display next to the focal length.

For more details, see the operating instructions of the camera and

SCA adapter.

Setting procedure see cap. 8.

8.6 Remote mode (remote)

With this special function the flash unit can be activated as controller or slave

in the cordless Metz remote mode. Here the following settings are possible:

• Remote OFF

• Remote Co1; the flash unit functions as controller with address 1.

• Remote Co2; the flash unit functions as controller with address 2.

When the controller mode is activated the symbol Co. flashes beneath the

display for flash mode.

When operating the control unit with the slave adapter SCA 3083 digital,

☞

the following settings are possible:

• Remote Sl1; the flash unit functions as slave with address 1.

• Remote Sl2; the slave functions as slave with address 2.

When the slave mode is activated, the symbol SL flashes under the display

for the flash mode.

For the slave mode the flash unit must be switched to the flash mode

TTL (see 6)!

For more details on the cordless Metz remote mode see chapter 17.

Setting procedure see cap. 8.

8.7 Metre – feet commutation (m / ft)

The maximum flash range in the display of the flash unit can be optionally set

in metres m or feet ft. The setting is made under the menu point m / ft.

Setting procedure see cap. 8.

9. Zoom position of the flash reflector

The adjustment of the zoom position of the flash reflector  can be made for

a focal length of lens from 24 mm (24 x 36). For lenses with focal lengths

from 20 mm a wide angle diffuser (included) can be used.

The following zoom positions are available:

24 mm – 28 mm – 35 mm – 50 mm – 70 mm – 85 mm – 105 mm

(corresponding to 24 x 36)

When using the wide angle diffuser the zoom reflector must be in the

24 mm position!

Automatic zoom adjustment

If the flash unit is equipped with an SCA adapter from the SCA 3002 system

and is operated with a camera, which reports the data for the focal length of

the camera to the flash unit, the zoom position of its reflector automatically

adjusts to the focal length of the lens. In the display of the flash unit, A-Zoom

and the reflector position (mm) are shown.

☞

705 47 0041.A4 76MZ-5 digital 15.03.2007 8:28 Uhr Seite 84

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 147 148

Comments to this Manuals

No comments

Metz 76 MZ-5 User Manual Page 84

Comments to this Manuals

Related products and manuals for Cameras Metz 76 MZ-5