Metz 44 AF-1 digital Instruction Manual download pdf (Page 93)

93

ķ

7.1 Wide-angle diffuser

With the integrated wide-angle diffuser

, focal lengths from 12mm can be

exposed (135 format).

Flip the wide-angle diffuser



out of the

main reflector as far as it goes and let go.

It will fold down automatically.

The main reflector will be guided to the

required position automatically.

Automatic adjustment of the motor

zoom main reflector cannot occur when

the wide-angle diffuser is in use.

To set the wide-angle diffuser  to 90°

flip it up and slide it in completely.

7.2 Mecabounce 52-90

When the Mecabounce (accessories, see

17) is mounted on the flash unit’s main

reflector, the main reflector is automati-

cally set in the required position.

Automatic adjustment of the motor

zoom main reflector is not possible

when the Mecabounce is in use.

The wide-angle diffuser  and

Mecabounce cannot be used at the

same time.

8 Remote slave flash mode

The flash unit supports Canon`s wireless E-TTL

Remote System in slave flash mode.

This means that one or more slave flash

units can be controlled remotely from a

master or controller flash unit on the

camera (e.g. mecablitz 58 AF-1C digi-

tal) or from the camera master.

Slave flash unit 44AF-1 is always set to

slave Group A and all remote channels

1, 2, 3 and 4.

The slave flash units must be able to

receive light from the master or controller

flash unit via the integrated sensor  for

remote use.

The flash unit in the camera can func-

tion as a master or controller flash unit

depending on camera type. Further

information regarding settings on the

master or controller flash unit can be

found in the respective operating

instructions.

☞

☞

☞

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 165 166

Comments to this Manuals

No comments