Metz MECABLITZ 52 AF-1 digital Nikon User Manual download pdf (Page 158)

158

k

After the shot, remember to cancel the manu-

al flash exposure correction in the camera!

Strongly reflecting objects in the motif can

have a negative impact on the camera’s

automatic exposure. The photograph will be

underexposed. Remove reflecting objects or

set a positive correction value.

9 Special functions

Depending on the camera model or camera

group, various special functions are avai-

lable.

For this purpose, data exchange must first

occur between the flash unit and camera to

access and set the special functions, for

example by tapping the shutter release.

The setting must occur immediately after

accessing the special functions since other-

wise the flash unit automatically switches

back to normal flash operation after a few

seconds!

9.1 Motor zoom reflector („Zoom“)

The motor zoom reflector of the flash unit can

illuminate lens angles from 24 mm

(35 mm format).

Thanks to the use of the integrated wide-

angle diffuser , the illumination widens

to 12 mm.

Auto zoom

The zoom position of the reflector is automa-

tically adjusted to the lens focal length when

the flash unit is used with a camera that

transmits the data related to the lens focal

length. After the flash unit has been switched

on, „Zoom“ and the current zoom position of

the reflector are shown in the display.

Automatic adjustment occurs for lens focal

lengths from 24 mm.

The automatic adjustment will not be activa-

ted if the reflector is swivelled, if the wide-

angle diffuser  is pulled out, or a

Mecabounce (accessory) is mounted.

If so desired, the position of the reflector can

be manually adjusted in order to achieve

particular lighting effects

(such as spot effect etc.).

+

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 285 286

Comments to this Manuals

No comments