Metz MECABLITZ 50 AF-1 digital Sony User Manual download pdf (Page 93)

10.2 Bounce flash with a reflector card

The use of bounce flash with the integrated reflector card  can bring out high-

lights in the eyes of human subjects:

• Tilt the reflector head upwards by 90°.

• Pull the reflector card  together with the wide-

angle diffuser from above out of the reflector head

and forwards.

• Hold the reflector card  and push the wide-angle

diffuser  back into the reflector head.

10.3 Close-ups / macro shots

In close-ups and macro shots, parallax error between the flash unit and lens

may result in shadows on the lower edge of the image. To compensate for this,

the main reflector  can be tilted downwards by an angle of -7°.

To do this, depress the reflector unlocking button  and tilt the reflector down-

ward.

Certain minimum lighting distances must be maintained for close-up shots to

avoid over-exposure.

The minimum lighting distance is approximately 10% of the maximum

flash range indicated in the display. When the reflector head is tilted

downwards, the maximum flash range flashes as an indication.

For close-up shots, make sure that the flash light is not shaded by the

lens!

☞

11 Flash synchronisation

11.1 Automatic flash sync speed control

Depending on the camera model and camera mode, the shutter speed is swit-

ched to flash sync speed when flash readiness is reached (see the camera’s ope-

rating instructions).

Shutter speeds cannot be set faster than the flash sync speed, or they are swit-

ched automatically to the flash sync speed. Various cameras have a sync speed

range, for example from 1/60 sec to 1/250 sec (see the camera’s operating

instructions). The sync speed set by the camera depends on the camera mode,

the ambient light, and the focal length of the lens used.

Shutter speeds slower than the flash sync speed can be set according to the

camera mode and the selected flash synchronisation (see 11.3 and 11.4).

If a camera with a between-the-lens shutter and high-speed synchronisa-

tion (see 11.5) is used, flash sync speed is not controlled automatically.

As a result, the flash can be used at all shutter speeds. If you need the

full light output of the flash unit, you should not select a shutter speed

that is any faster than 1/125 sec.

11.2 Normal synchronisation

In normal synchronisation the flash unit is triggered at the beginning of the shutter

time (first curtain synchronisation). Normal synchronisation is the standard mode

on all cameras. It is suitable for most flash shots.

The camera, depending on the mode being used, is

switched to the flash sync speed. Speeds between

1/30 sec. and 1/125 sec. are customary (see the

camera’s operating instructions). No settings are

necessary on the flash unit, nor is there any display for

this mode.

☞

709 47 0202.A3 50AF-1 S 17.12.2010 13:27 Uhr Seite 93

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 157 158

Comments to this Manuals

No comments

Metz MECABLITZ 50 AF-1 digital Sony User Manual Page 93

Comments to this Manuals

Related products and manuals for Flashlights Metz MECABLITZ 50 AF-1 digital Sony